Stucco Las Vegas
We offer the highest quality Stucco and
Plaster in Las Vegas, Nevada. With 30 years
experience and so many references you'll be
glad you chose us. Please give us a chance
to prove ourselves so you can enjoy that
great look that you expected.

Exterior Stucco Finish is a blend of  portland cements, lime and clean graded aggregates along with color pigments. it can be ordered
with integral color for a fine stucco finish or the color can be added to the mix.. Two bases are used with color packages. The
bases are designated 100 and 200.
Exterior Stucco Finish provides a cost effective, low maintenance coating for all portland cement substrates.
Exterior Stucco can be applied in a variety of colors and textures.
Exterior Stucco Finish is an integral part of a conventional plaster one-hour fire assembly.
Coarse: Used for a heavy skip trowel, sand or dash finishes. Coarse sands add greater depth and shadowing to stucco
textures.
Medium: Used for lighter sand finishes and semi-smooth southwestern textures along with the more traditional skip trowel finishes such as is
applied in Las Vegas Nevada..
Fine: Used for semi-smooth or smooth finishes.
Coverage will vary due to sand blend and desired texture. Use the following coverage estimates based on our medium
aggregate and 90 lb bag as a general guideline. Estimate approximately 10% less coverage for an 90 lb bag:
Mixing Premixed Exterior Stucco:
Add enough water for one sack to the mixer. Add the first sack of finish to the water in the mixer and allow the sack to mix
for approx 3-5 minutes or until all mud is of a consistant color and thickness. Add each additional sack to the mixer by adding half the
required water first - then the sack – then
the remaining water. Add the final sack to the batch, adding enough water to bring the complete
batch to a working consistency. Allow the complete batch to mix for 15 to 20 minutes after the last sack has been added.
How to apply:
Exterior Stucco Finish shall be applied by hand or machine application to a finished thickness of 1/16 to 1/8 inch.
1.Hand Application over portland cement base- Prior to application of Exterior Stucco Finish, the base coat shall be
sprayed with clean water to control and equalize water absorption
2.Machine Application over portland cement base - Base coat shall be dry. (It is not necessary to spray the base coat
before application of Exterior Stucco Finish by machine, as the compound itself has ample moisture when mixed for this
purpose.) Spray the first coat in a thin consistency over the dry surface and cover base coat completely.
After first coat has dried, which may take two or more hours depending on climatic conditions, spray second coat in a
thicker consistency and bring to the desired texture. Second coat may be sprayed the following day.
EXTERIOR STUCCO
FINISH
A blend of portland cement, lime and clean graded aggregates.
CONTINUE ON BACK
Curing:
Stucco Finish requires moist curing in hot, dry or windy conditions like Las Vegas Nevada. Cementitious base coats and
finishes are high pH surfaces. When paint coatings are applied – follow manufacturers' recommendations for pH
compatibility.
Limitations:
Do not apply when surface or ambient temperatures are at or below 400F / 4.40C or above 1000F / 340C. Do not apply to
surfaces that are contaminated with bond breakers, oils or other matter that may affect the performance of the product.